Experimental and numerical investigation of methane thermal partial oxidation in a small-scale porous media reformer
| Autor: | José C. F. Pereira, José M.C. Pereira, Miguel A.A. Mendes, I. Frenzel, Dimosthenis Trimis, Subhashis Ray, A. Loukou |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
Methane reformer
Renewable Energy Sustainability and the Environment 020209 energy Energy Engineering and Power Technology Thermodynamics 02 engineering and technology 021001 nanoscience & nanotechnology Condensed Matter Physics Combustion Methane chemistry.chemical_compound Fuel Technology chemistry 0202 electrical engineering electronic engineering information engineering Small stationary reformer Solid oxide fuel cell Partial oxidation 0210 nano-technology Porous medium Syngas |
| Zdroj: | International Journal of Hydrogen Energy. 42:652-663 |
| ISSN: | 0360-3199 |
| DOI: | 10.1016/j.ijhydene.2016.11.062 |
| Popis: | This study deals with the topic of synthesis gas (syngas) production from preheated, rich methane/air mixtures. The examined process is based on non-catalytic partial oxidation within a small-scale porous media based reformer, intended for application in Solid Oxide Fuel Cell (SOFC) based systems. For this purpose, process characteristics like temperature profiles within the porous material and exhaust syngas compositions were experimentally and numerically investigated under conditions that can be encountered in such systems. The soot content of the generated syngas was also measured using the technique of Scanning Mobility Particle Sizing. An important feature of the reformer, which was demonstrated during the experiments for a wide range of thermal loads (380–1895 kW/m2) and equivalence ratios (1.9–2.6), is the ability to operate based on stationary flames. This is achieved using a two-section design. The sections show a conical and a cylindrical geometry, whereas the same porous medium is installed in both of them. For this study, the solid matrix was created as packed bed of Al2O3-Raschig rings (62% open porosity). The process was simulated with a quasi-1D numerical model, which uses a volume-averaged approach. The model solves both the gas- and solid-phase energy balances explicitly and accounts for the radiative heat transport in the solid-phase. Peak temperatures measured within the porous zone provide evidence of superadiabatic combustion, which is also confirmed by the numerically predicted temperature profiles with the model. Syngas compositions reveal a maximum reforming efficiency of 65% based on H2 and CO, while the soot limit of the process was found to lie at φ = 2.2, regardless of thermal load and preheat temperature of the fresh mixture. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect