Modeling and control of a permanent magnet synchronous generator dedicated to standalone wind energy conversion system
Autor: | Bouras Lakhdar, Louar Fateh, Omeiri Amar, Djellad Abdelhak, Ouari Ahmed |
---|---|
Rok vydání: | 2016 |
Předmět: |
Engineering
Wind power business.industry 020209 energy 020208 electrical & electronic engineering Induction generator Energy Engineering and Power Technology Control engineering 02 engineering and technology Permanent magnet synchronous generator Turbine Wound rotor motor Automotive engineering law.invention Renewable energy law 0202 electrical engineering electronic engineering information engineering Torque Multiplier (economics) business |
Zdroj: | Frontiers in Energy. 10:155-163 |
ISSN: | 2095-1698 2095-1701 |
DOI: | 10.1007/s11708-016-0410-1 |
Popis: | The interest for the use of renewable energies has increased, because of the increasing concerns of the environmental problems. Among renewable energies, wind energy is now widely used. Wind turbines based on an asynchronous generator with a wound rotor present the inconvenience of requiring a system of rings and brooms and a multiplier, inferring significant costs of maintenance. To limit these inconveniences, certain manufacturers developed wind turbines based on synchronous machines with large number of pairs of poles coupled directly with the turbine, avoiding using the multiplier. If the generator is equipped with permanent magnets, the system of rings and brooms is eliminated. The control of the permanent magnet synchronous generator (PMSG) can be affected with the implementation of various techniques of control. This paper presented a new approach mainly based on the control strategy of power production system based on the PMSG. In fact, a mathematical model that simulates the Matlab chain was established with the introduction of control techniques, such as direct control of the torque (DTC) to control the load side converter (LSC), the control of the speed of the turbine and the DC-bus voltage ensured by PI regulators. To show the performance of the correctors used, some simulation results of the system were presented and analyzed. |
Databáze: | OpenAIRE |
Externí odkaz: |