Characteristics of MoO3 Thin Films Fabricated by Rapid Thermal Annealing of Mo for an Anode Buffer Layer for Organic Solar Cells
| Autor: | Inwoo Lee, Jaehyoung Park, Ki-Chang Jung, Hyojung Bae, Jun-Seok Ha, Hang Ju Ko, Dae-Hwa Mun |
|---|---|
| Rok vydání: | 2013 |
| Předmět: |
Materials science
Organic solar cell Annealing (metallurgy) Non-blocking I/O Metals and Alloys Analytical chemistry chemistry.chemical_element Surfaces Coatings and Films Electronic Optical and Magnetic Materials Anode Electrical resistance and conductance chemistry PEDOT:PSS Molybdenum Modeling and Simulation Thin film |
| Zdroj: | Korean Journal Metals and Materals. 51:449-453 |
| ISSN: | 1738-8228 |
| Popis: | Acidic PEDOT:PSS anode buffer layers (ABLs) are widely used for improving efficiency in organic based solar cells. Recently, stable p-type metal oxides, such as NiO, MoO3, and V2O5, have been used to replace the commonly used acidic PEDOT:PSS ABL. Among these metal oxides, the thermally evaporated MoO3 anode buffer layer is largely used because it has appropriate optical and electrical properties. In this study, we used rapid thermal annealing (RTA) for fabricating polycrystalline MoO3 thin films. MoO3 thin films were fabricated by annealing 30 nm molybdenum in an oxygen atmosphere under 350 °C-550 °C RTA conditions at intervals of 100 °C. In particular, we suggest an optimized temperature of 450 °C for efficient ABL in organic based solar cells. The MoO3 thin film with 450 °C RTA conditions has the relatively highest RMS roughness (46.5 nm) and proper electrical resistance. The characteristics of MoO3 ABLs fabricated by the RTA process of Mo are compared with thermally evaporated MoO3 ABL. (Received September 25, 2012) |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|