| Autor: |
H M Jadav, S.V. Kulkarni, Ramesh C. Joshi, Aniruddh Mali |
| Rok vydání: |
2016 |
| Předmět: |
|
| Zdroj: |
2016 2nd International Conference on Contemporary Computing and Informatics (IC3I). |
| DOI: |
10.1109/ic3i.2016.7918027 |
| Popis: |
Ion Cyclotron Resonance Heating (ICRH) system has two different impedance matching systems for RF transmission. One is offline matching which has been used before applying the experimental shots. Another is online impedance matching which has been used during experimental shot. Offline matching network consists of two coarse tuner, static stubs and coarse phase shifter which are identical in both the transmission lines. There are motorized arrangement installed in each stubs and phase shifters. Both static and coarse stubs are used to vary length in order to match the source impedance with load impedance. Phase shifter is used for matching impedance via varying the phase of the power. Programmable Logic Controller (PLC) based instrumentation has been implemented for the system. Offline matching should be operated below 1 kHz frequency in order to move stepper motors using square pulses employed to motor controller. In existing system this operation has been carried out by VME instrumentation and control. In order to reduce load on VME, PLC based system has been designed and integrated with VME based DAC. SIMATIC Windows Control Center (WinCC) software has been used as SCADA i.e. front end user interface. WinCC SCADA can communicate with OPC (Open Process Control) server using different PLC signals. This paper describes technical details, design and development of PLC based offline impedance matching system using WinCC as SCADA. The developed system has proved accurate and reliable in use of application as per system requirement. The SCADA system also shows motor frequency and motor speed profile with upper and lower limits. It logs data at the end of operation by which it retrieve the last run status of each motor when it starts again. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
