1V Differential Input Stage with Bulk-Driven Current Mirror for Low-Voltage Operational Amplifier

Autor: Ketan J. Raut, R. V. Kshirsagar
Rok vydání: 2017
Předmět:
Zdroj: Indian Journal of Science and Technology. 10:1-10
ISSN: 0974-5645
0974-6846
DOI: 10.17485/ijst/2017/v10i36/110792
Popis: Objectives: This paper presents the design and analysis of differential input stage to design low voltage operational amplifier, where bulk-driven MOSFETs are incorporated in the current mirror. Methods/Analysis: To be possible to operate circuit at lower supply voltage, body-driven transistors are used to design current mirror. Circuit is designed using 180nm (Complementary Metal Oxide Semiconductor) CMOS n-well technology and BSIM 3v3 Specter models are used to analyze the design. Performance parameters are validated by simulations. Findings: The amplifier shows DC openloop gain of 44 dB. The Unity Gain Bandwidth (UGB) is 3.3 MHz with a phase margin of 87.8°. The amplifier exhibits Common-Mode Rejection Ratio (CMRR) of 62 dB. The input referred spot noise voltage at 1KHz is 42.46nV/√Hz. These results are obtained with a supply voltage of 1V. Average power consumption of the amplifier is 36.36 μW under 10 pF load condition, which makes it suitable for low voltage and low power applications. Improvement: Gain can be further improved by employing cascode current mirror in the presented amplifier as it will increase output impedance. Keywords: Analog and Mixed-signal system, Bulk-driven Current Mirror, Differential Input Stage, Low-voltage Operational Amplifier, CMOS
Databáze: OpenAIRE