Emittance Measurement from the Proton Testbeam at KAHVELab
| Autor: | Halis, Duygu, Aciksoz, Sevim, Adiguzel, Aytul, Cetinkaya, Hakan, Esen, Seyma, Ilhan, Taha, Kilicgedik, Atacan, Ogur, Salim, Oz, Sinan, Ozcan, Erkcan, Unel, Gokhan |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2022 |
| Předmět: | |
| DOI: | 10.18429/jacow-linac2022-tupori17 |
| Popis: | A testbeam using a Radio Frequency Quadrupole (RFQ) operating at 800 MHz, to accelerate a 1.5mA proton beam to 2MeV energy has been designed, manufactured and is currently being commissioned at KAHVELab, Istanbul. The beam from the microwave discharge ion source (IS) must be matched to the RFQ via an optimized Low Energy Beam Transport (LEBT) line. The LEBT line consists of two solenoid magnets, two stereer magnets and a beam diagnostics station named MBOX. All the beamline components are locally designed, simulated, manufactured and tested with local resources. The MBOX should be able to measure the beam current and profile, as well as the beam emittance, to ensure an accurate match between IS and RFQ. It includes a number of diagnostic tools: a Faraday Cup, a scintillator screen, and a pepper pot plate (PP). An analysis software is developed and tested for the PP photo analysis. This contribution will present the proton beamline components and will focus on the MBOX measurements, especially on the PP emittance analysis. Proceedings of the 31st International Linear Accelerator Conference, LINAC2022, Liverpool, UK |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|