Surface oxidation of styrene butadiene copolymers: Study by laser ablation and secondary ion mass spectrometry
Autor: | D. Ruch, Jean-François Muller, H.-N. Migeon, R. Zimmer, C. Boes |
---|---|
Rok vydání: | 2003 |
Předmět: |
Static secondary-ion mass spectrometry
Materials science Styrene-butadiene Polymers and Plastics General Chemistry Mass spectrometry Photochemistry Surfaces Coatings and Films Styrene Secondary ion mass spectrometry chemistry.chemical_compound Polybutadiene chemistry Polymer chemistry Materials Chemistry Copolymer Polystyrene |
Zdroj: | Journal of Applied Polymer Science. 87:1910-1917 |
ISSN: | 1097-4628 0021-8995 |
DOI: | 10.1002/app.11506 |
Popis: | The capabilities of ion bombardment and laser ablation coupled to mass spectrometry as independent techniques to investigate the surface thermooxidative stability of polystyrene, polybutadiene polymers, and styrene butadiene rubber (SBR) copolymers were investigated. Surface chemical modifications were detected according to the polymeric structure. The degradation products detected by static secondary ion mass spectrometry appeared at m/z 29, 43, and 55. Their compositions were related to the general formulae CnHmO+ with n = 1–3 and m = 1–3 for polybutadiene and styrene butadiene copolymers, whereas polystyrene was not affected by the aging treatment. The CnHmO+ ions result from butadiene unit degradation. The laser ablation ionization Fourier transform ion cyclotron resonance mass-spectrometry results confirmed the detection of CnHmO+ ions. Finally, it may be considered that the surface thermooxidative process of SBR copolymers begins with butadiene unit degradation. The development of butadiene unit oxidation showed a dynamic oxidation phase, which coincided with a loss of unsaturation. The influence of the polymer conformation (blocked, branched, and random) on the surface oxidation for 30% styrene SBR compounds was also studied. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1910–1917, 2003 |
Databáze: | OpenAIRE |
Externí odkaz: |