| Autor: |
Il-Bum Kwon, Jooeun Im, Ki-Sun Choi, Mi Hyun Kim, Tae-Kyung Hwang |
| Rok vydání: |
2013 |
| Předmět: |
|
| Zdroj: |
Journal of the Korean Society for Nondestructive Testing. 33:459-464 |
| ISSN: |
1225-7842 |
| DOI: |
10.7779/jksnt.2013.33.5.459 |
| Popis: |
Structures can be evaluated their health status by allowable loading criteria. These criteria can be determined by the maximum strain. Therefore, in order to detect this maximum strain of structures, fiber optic Bragg grating(FBG) sensor probes are newly designed and fabricated to perform the memorizing detection even if the sensor system is on-and-off. The probe is constructed with an FBG optical fiber embedded in silver epoxy. When the load is applied and removed on the structure, the residual strain remains in the silver epoxy to memorize the maximum strain effect. In this study, a commercial Al-foil bonded FBG sensor probe was tested to investigate the detection feasibility at first. FBG sensor probes with silver epoxy were fabricated as three different sizes. The detection feasibility of maximum strain was studied by doing the tensile tests of CFRP specimens bonded with these FBG sensor probes. It was investigated the sensitivity coefficient defined as the maximum strain divided by the residual strain. The highest sensitivity was 0.078 of the thin probe having the thickness of 2 mm. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
