A new approach for describing pitting corrosion of steel bars in concrete
| Autor: | Lianjuan Miao, Guan Xinchun, Li Hui, Ou Jinping |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
010302 applied physics
Materials science General Chemical Engineering Metallurgy 02 engineering and technology Surface finish 021001 nanoscience & nanotechnology Steel bar 01 natural sciences Fractal dimension Corrosion 0103 physical sciences Pitting corrosion General Materials Science Statistical analysis 0210 nano-technology |
| Zdroj: | Anti-Corrosion Methods and Materials. 64:573-579 |
| ISSN: | 0003-5599 |
| Popis: | Purpose The purpose of this study is to quantitively characterize pitting or local corrosion of steel bars. Characterization of pitting or local corrosion is important for steel bar corrosion research in concrete, which is still an unsolved problem for the reason that the pitting on corroded steel is distributed irregularly, besides the varied pitting depths. To solve this problem in a certain degree, two parameters were collectively used to find the pitting distribution and pitting depth distribution of corroded steel bar surface. Design/methodology/approach Corroded reinforcement bars were subjected to two different corrosive conditions to obtain the profile of the surface of corroded steel bar. The arithmetic mean deviation of the profile, Ra, also a roughness parameter, and the fractal dimension, D, were computed using MATLAB software from the data on corroded steel bar profiles scanned by a profile tester. Statistical analysis was performed to determine the parameters distribution of Ra. Findings Ra and D can assist gravimetric technique in defining the degree of pitting corrosion and make further understanding about the characterization of local or pitting corrosion. Originality/value Two parameters were collectively used to find the pitting distribution and pitting depth distribution of corroded steel bar surface, while many studies only study the fractal dimension of pitting corrosion. And, the relationship between these two parameters is studied when using them to describing the non-uniformity of pitting corrosion degree. Using these two parameters can much better describe the non-uniform degree of pitting corrosion. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|