Reuse of ferric sludge as an iron source for the Fenton-based process in wastewater treatment

Autor: Juri Bolobajev, Marina Trapido, Taavo Tenno, Niina Dulova, Marika Viisimaa, Anna Goi, Eneliis Kattel
Rok vydání: 2014
Předmět:
Zdroj: Chemical Engineering Journal. 255:8-13
ISSN: 1385-8947
DOI: 10.1016/j.cej.2014.06.018
Popis: A mature municipal landfill leachate (S1), a wood soaking basin effluent from a plywood manufacturing plant (S2), and a leachate collected from a semicoke landfill area of an oil-shale thermal treatment plant (S3) were subjected to the Fenton/Fenton-based treatment (H 2 O 2 /Fe 2+ , H 2 O 2 /Fe 3+ and H 2 O 2 /sludge systems). The results of ferric coagulation trials indicated a high efficacy in S2; thus, only pre-coagulated samples (cS2) were further treated by the H 2 O 2 /iron systems. Irrespective of reaction duration, S1 was more recalcitrant to oxidation than cS2 and S3. The optimal COD/H 2 O 2 weight ratio for cS2 and S3 was 1:1 with respective 21(35) and 36(45)% residual COD(DOC). In the case of S1, the COD/H 2 O 2 w/w of 1:3.45 proved the most efficient with 30 and 35% residual COD and DOC, respectively. The results also indicated an increase in BOD 7 /COD ratio and a reduction in the acute toxicity to Daphnia magna of the studied wastewater samples after the Fenton/Fenton-based treatment. The application of the Fenton-based process catalysed with iron-containing sludge exhibited efficacies similar to classical Fenton treatment over four reuse cycles. The reuse of ferric sludge without any regeneration as an iron source in the Fenton-based process was displayed as a feasible solution to minimise the production of hazardous ferric waste and reduce the overall cost of the treatment process.
Databáze: OpenAIRE
Externí odkaz: