Three-dimensional electro-Fenton system with iron foam as particle electrode for folic acid wastewater pretreatment
Autor: | Yingshi Zhu, Shan Qiu, Yanshi Zheng, Guojun Li, Fengxia Deng, Fang Ma |
---|---|
Rok vydání: | 2019 |
Předmět: |
Electrolysis
Chemistry Chemical oxygen demand chemistry.chemical_element Filtration and Separation 02 engineering and technology 021001 nanoscience & nanotechnology Mass spectrometry Mineralization (biology) Analytical Chemistry law.invention 020401 chemical engineering Wastewater law Electrode Chlorine Particle 0204 chemical engineering 0210 nano-technology Nuclear chemistry |
Zdroj: | Separation and Purification Technology. 224:463-474 |
ISSN: | 1383-5866 |
DOI: | 10.1016/j.seppur.2019.05.054 |
Popis: | At the very first time, a three-dimensional (3D) iron foam was used as the particle electrode for folic acid (FA) wastewater pretreatment in the electro-Fenton (EF) process. In this work, the effects of key operating parameters, including the initial COD concentration, applied current, initial pH and iron foam dosage were optimized regarding the chemical oxygen demand (COD) and total nitrogen (TN). COD and TN removal percentage of FA wastewater reached 43.5% and 70.4%, respectively during 6 h electrolysis under the following optimal conditions: initial COD concentration of 10,000 mg/L, applied current of 300 mA, initial pH of 3 and iron foam dosage of 4 g. Regarding the main oxidant species in the proposed EF with iron foam particle electrode, OH and active chlorine were responsible for FA mineralization, confirming by the electron paramagnetic resonance (EPR) spectra of DMPO− OH. The kinetic analysis and mechanism study suggested that both electro-oxidation and electro-coagulation exited in the system. A possible FA degradation pathway based on the identification of by-products was proposed according to Liquid chromatography/time-of-flight/mass spectrometry results. In addition, BOD5/COD ratio improved from 0.22 to 0.44 after EF treatment coupled with toxicity reduction. In a word, EF with iron foam particle electrode was a feasible process for FA pretreatment. |
Databáze: | OpenAIRE |
Externí odkaz: |