INFLUENCE OF POSITION ERRORS ON THE STABILITY OF A LOADBEARING VERTICAL ROD OF GREAT FLEXIBILITY
| Autor: | Alexandr Isayev, Olha Kulikovskaya, Volodymyr Katushkov |
|---|---|
| Rok vydání: | 2022 |
| Předmět: | |
| Zdroj: | Urban development and spatial planning. :203-209 |
| ISSN: | 2522-9206 2076-815X |
| DOI: | 10.32347/2076-815x.2022.80.203-209 |
| Popis: | Many building structures are considered as rod systems. Bearing elements of rod systems are under load and experience large stresses and deformations. When external loads increase, these stresses and strains also increase. There may come a point where some elements lack strength, stiffness or stability. Such cases may arise due to uneven settlement and roll of the structure in conjunction with errors in the manufacture and installation of structures, insufficient development of projects, etc. One of the main measures for the timely prevention of emergency situations is the properly organized monitoring of the stress-strain state of the elements. In this paper, we consider a model of stressed structure, which combines elements in the form of flexible deformable rods and elements acting on them, represented by force vectors. As an example, we consider a structure of two vertical rectilinear rods pointing along one plumb line and connected in a node. The lower rod is pinched in the base and is a load bearing element. The upper rod is an external load for the lower one and is represented by the equivalent force vector. In theory, the lines of action of forces lie on one vertical line, so there are no other forces and moments besides axial longitudinal forces; the forces are applied at one point with given coordinates. When constructing the rod system, each rod must be set to a given design position. There will be position errors of the elements during the installation phase of the structure. Position errors are generally represented by errors in the specified angles of inclination of the rods and errors in the position of the ends of the rods in the assembly. In a stressed structure, these errors are equivalent to the errors of the force vectors. A modified system of force vectors arises. In such a system, due to position errors, a horizontal force arises which has the main influence on the stability of the supporting flexible rod when the external load increases. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|