Wideband Antennas Using Coaxial Waveguide
Autor: | Maryam Razmhosseini, Roshanak Zabihi, Rodney G. Vaughan |
---|---|
Rok vydání: | 2021 |
Předmět: |
Physics
Waveguide (electromagnetism) Acoustics Bandwidth (signal processing) Physics::Optics 020206 networking & telecommunications 02 engineering and technology 7. Clean energy Transverse mode Standing wave Transmission line 0202 electrical engineering electronic engineering information engineering Electrical and Electronic Engineering Antenna (radio) Electrical impedance Parametric statistics |
Zdroj: | IEEE Transactions on Antennas and Propagation. 69:6273-6283 |
ISSN: | 1558-2221 0018-926X |
DOI: | 10.1109/tap.2021.3070121 |
Popis: | Waveguide arrays comprise slot radiators cut into hollow, single-mode, standing wave structures. Their impedance bandwidth and compactness are limited by the waveguide cutoff. By using the TEM mode of a coaxial waveguide, a more compact structure with a larger bandwidth is possible at the expense of increased ohmic loss in the waveguide. Using this basis, a new type of slotted coaxial waveguide antenna is presented. A compact waveguide array means that the element and array aspects are not independent, and with no accurate transmission line models for the structure, the design is from a parametric study by simulation. Two basic designs are demonstrated: the first with no constraint on the azimuthal extent of the slots, and the second where some mechanical strength of the waveguide is maintained by constraining the azimuthal extent of the slots to be 90° or less. The parametric studies provide insight for realizing the high bandwidth, and measurements of prototypes confirm the performance. These antennas are useful for integration with cylindrical structures such as masts or bicycle and drone frames. |
Databáze: | OpenAIRE |
Externí odkaz: |