Proton Exchange Membrane Development and Processing for Fuel Cell Application
Autor: | Philippe Bébin, Hervé Galiano |
---|---|
Rok vydání: | 2007 |
Předmět: | |
Zdroj: | Materials Science Forum. :1327-1331 |
ISSN: | 1662-9752 |
DOI: | 10.4028/www.scientific.net/msf.539-543.1327 |
Popis: | The development of new proton exchange membranes for PEMFC has to be related to the membrane processing as it can change drastically the final properties of the material. Indeed, for the same material, a membrane prepared by a solvent-casting process has a lower lifetime than an extruded one. The proton conduction of the membrane can also be dependent on the membrane processing, especially when some removable plasticizers are used to perform the membrane extrusion. Some residual porosity, left in the material after removing the plasticizer, is suspected to enhance the proton conduction of the film. Fuel cell experiments have shown that extruded sulfonated polysulfone membrane can give the same performance as a Nafion® reference membrane whereas the proton conductivity of PSUs is twenty times lower than the Nafion® one. Additional improvements of the membrane properties can also be expected by adding some proton conductive fillers to the organic polymer. This approach enhances the proton conductivity of sulfonated polysulfone to values similar to Nafion®. On the other hand, when Nafion® is used as a matrix for the proton conductive fillers, a very significant improvement of fuel cell performance is obtained. |
Databáze: | OpenAIRE |
Externí odkaz: |
načítá se...