| Autor: |
Michael Nikolaou, Leila Zeinali, Christine Ehlig-Economides |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
Day 2 Wed, September 22, 2021. |
| DOI: |
10.2118/205967-ms |
| Popis: |
An Enhanced Geothermal System (EGS) uses flow through fractures in an effectively impermeable high-temperature rock formation to provide sustainable and affordable heat extraction that can be employed virtually anywhere with no need for a geothermal reservoir. The problem is that there is no commercial application of this technology. The three-well pattern introduced in this paper employs a multiple transverse fractured horizontal well (MTFHW) drilled and fractured in an effectively impermeable high-temperature formation. Two parallel horizontal wells drilled above and below or on opposing sides of the MTFHW have trajectories that intersect its created fractures. Fluid injected in the MTFHW flows through the fractures and horizontal wells, thus extracting heat from the surrounding high-temperature rock. This study aims to find the most cost-effective well and fracture spacing for this pattern to supply hot fluid to a 20-megawatt power plant. Analytical and numerical models compare heat transfer behavior for a single fracture unit in an MTFHW that is then replicated along with the horizontal well pattern(s). The Computer Modeling Group (CMG) STARS simulator is used to model the circulation of cold water injected into the center of a radial transverse hydraulic fracture and produced from two horizontal wells. Key factors to the design include formation temperature, the flow rate in fractures, the fractured radius, spacing, heat transfer, and pressure loss along the wells. The Aspen HYSYS software is used to model the geothermal power plant, and heat transfer and pressure loss in wells and fractures. The comparison between analytical and numerical models showed the simplified analytical model provides overly optimistic results and indicates the need for a numerical model. Sensitivity studies using the numerical model vary the key design factors and reveal how many fractures the plant requires. The economic performance of several scenarios was investigated to minimize well drilling and completion pattern costs. This study illustrates the viability of applying known and widely used well technologies in an enhanced geothermal system. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
