The Effect of Machining Toolpath on Surface Roughness and Dimensional Accuracy for High-Speed Micro Milling
| Autor: | David Swailes, Dehong Huo, Amin Dadgari |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
0209 industrial biotechnology
Tool path 020901 industrial engineering & automation Materials science Surface roughness Mechanical engineering General Materials Science 02 engineering and technology 021001 nanoscience & nanotechnology 0210 nano-technology Condensed Matter Physics Machining toolpath Atomic and Molecular Physics and Optics |
| Zdroj: | Solid State Phenomena. 261:69-76 |
| ISSN: | 1662-9779 |
| DOI: | 10.4028/www.scientific.net/ssp.261.69 |
| Popis: | This paper investigates different machining toolpath strategies on machining efficiency and accuracy in the micro milling of linear and circular micro geometric features. Although micro milling includes many characteristics of the conventional machining process, detrimental size effect in downscaling of the process can lead to excessive tool wear and machining instability, which would, in turn, affects the geometrical accuracy and surface roughness. Most of the research in micro milling reported in literature focused on optimising specific machining parameters, such as feed rate and depth of cut, to achieve lower cutting force, better surface roughness, and higher material removal rate. However, there was little attention given to the suitability and effect of machining tool path strategies. In this research, a tool path optimisation method with respect to surface roughness and dimensional accuracy is proposed and tested experimentally. Various toolpath strategies, including lace(0°), lace(45°), lace(90°), concentric and waveform in producing linear and circular micro geometric features were compared and analysed. Experimental results show that the most common used strategies lace(0°) and concentric reported in the literature have provided the least satisfactory machining performance, while waveform toolpath provides the best balance of machining performance for both linear and circular geometries. Hence, at process planning stage it is critical to assign a suitable machining toolpath strategy to geometries accordingly. The paper concludes that an optimal choice of machining strategies in process planning is as important as balancing machining parameters to achieve desired machining performance. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|