Coating techniques for membrane distillation: An experimental assessment
| Autor: | B. Van der Bruggen, Chris Dotremont, Luc Pinoy, K De Sitter, Lies Eykens |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
Materials science
Analytical chemistry Membrane structure Filtration and Separation 02 engineering and technology engineering.material 021001 nanoscience & nanotechnology Membrane distillation Desalination Superhydrophobic coating Analytical Chemistry Membrane technology Membrane 020401 chemical engineering Coating Chemical engineering engineering Wetting 0204 chemical engineering 0210 nano-technology |
| Zdroj: | Separation and Purification Technology. 193:38-48 |
| ISSN: | 1383-5866 |
| DOI: | 10.1016/j.seppur.2017.10.070 |
| Popis: | Membrane distillation is a thermal membrane technology, commonly used for desalination. The industrial breakthrough of the technology requires high performing and inexpensive membranes. In this paper, an alternative for the traditional hydrophobic membrane materials has been explored through the deposition of a hydrophobic coating on a commercial hydrophilic membrane with a microporous structure. The coatings enable obtaining the required hydrophobicity and prevent membrane wetting. The effect of the surface chemistry and structure on the membrane distillation performance was investigated for 5 different coatings. The coatings were applied only on the top surface or on the entire membrane cross-section and the effect of this difference in morphology was investigated. The atmospheric toplayer coating and vacuum plasma coating on the entire cross-section were selected for further optimization. The stability of the coating and the relation of the membrane structure and performance at different salinities were also investigated using direct contact membrane distillation. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect