Electro-sonical deposition of nanostructured Sb2Se3 films for optoelectronic applications
Autor: | Mohsen Cheraghizade, Farid Jamali-Sheini, Behrouz Baghbanzadeh-Dezfuli |
---|---|
Rok vydání: | 2021 |
Předmět: |
Photocurrent
Materials science business.industry Band gap Mechanical Engineering Metals and Alloys 02 engineering and technology Substrate (electronics) 010402 general chemistry 021001 nanoscience & nanotechnology Tin oxide 01 natural sciences 0104 chemical sciences Electrical resistance and conductance Mechanics of Materials Electrode Materials Chemistry Optoelectronics Crystallite 0210 nano-technology business Deposition (chemistry) |
Zdroj: | Journal of Alloys and Compounds. 855:157308 |
ISSN: | 0925-8388 |
DOI: | 10.1016/j.jallcom.2020.157308 |
Popis: | In this study, a film of antimony selenide (Sb2Se3) was deposited on the Fluorine-doped tin oxide (FTO) as a substrate via electrodeposition at the potential of −0.55 V and the temperature of 25 °C. The effect of ultrasound waves during electrodeposition was also investigated at different times. The structural, morphological, optical, optoelectronic, and temperature dependence of the electrical resistance of the samples was investigated. The results showed formation of the polycrystalline phase of orthorhombic Sb2Se3. It was observed that when the ultrasound waves were used, the crystallite size (grain) and energy band gap decreased. It was found that in samples with a specified configuration, the intensity of the photocurrent decreased with increasing deposition time. Additionally, the anodic and cathodic photocurrent behaviors of the samples depended on the type and location of the electrode connection. Furthermore, the electrical resistance of the samples decreased with increasing temperature. In the sample with the lowest deposition time, conductivity and electrical activation energy were reduced by applying ultrasound waves, but they were increased by increasing the deposition time. |
Databáze: | OpenAIRE |
Externí odkaz: |