Studying the process of pipe reeling based on the monitoring of the drive’s loading parameters

Autor:	M. Yu. Bulganina, S. Yu. Belyaev, V. I. Kuznetsov, A. A. Fedulov
Rok vydání:	2021
Předmět:	010302 applied physics Materials science 0103 physical sciences Process (computing) Mechanical engineering 02 engineering and technology Flow stress 021001 nanoscience & nanotechnology 0210 nano-technology Wall thickness 01 natural sciences
Zdroj:	Materials Today: Proceedings. 38:1813-1816
ISSN:	2214-7853
DOI:	10.1016/j.matpr.2020.08.425
Popis:	The goal of the study was to establish the actual level of loads on the principle lines of the reeling mills mounted in the pipe rolling plant TPA 220 in the conditions of change the production release to the steel with the increased strength grade. The method of the study was the complex theoretically and experimental analysis. In the article the data of the loading limits on the principle lines of the reeling mills end their electric drives is set forth. The results of the experimental studies were processed for the most loaded route of rolling the pipe with the diameter 245 mm and the wall thickness 8.9 mm for the steel grade K55. The oscillograms of the observed processes and the calculated predictive oscillograms for the steel grade N80 have been presented which were obtained based on the theoretical and experimental analysis of the growth of the metal’s flow stress.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::ccfd047a3f4d5fb3f53f41537c4b12ab https://doi.org/10.1016/j.matpr.2020.08.425 Zobrazit plný text záznamu Full Text from ScienceDirect