| Autor: |
Ki-Hyoung Lee, Bong-Sang Lee, Min-Chul Kim, Dang-Moon Wee |
| Rok vydání: |
2010 |
| Předmět: |
|
| Zdroj: |
Journal of Nuclear Materials. 403:68-74 |
| ISSN: |
0022-3115 |
| DOI: |
10.1016/j.jnucmat.2010.05.029 |
| Popis: |
The fracture toughness properties of the tempered martensitic SA508 Gr.4N Ni–Mo–Cr low alloy steel for reactor pressure vessels were investigated by using the master curve concept. These results were compared to those of the bainitic SA508 Gr.3 Mn–Mo–Ni low alloy steel, which is a commercial RPV material. The fracture toughness tests were conducted by 3-point bending with pre-cracked charpy (PCVN) specimens according to the ASTM E1921-09c standard method. The temperature dependency of the fracture toughness was steeper than those predicted by the standard master curve, while the bainitic SA508 Gr.3 steel fitted well with the standard prediction. In order to properly evaluate the fracture toughness of the Gr.4N steels, the exponential coefficient of the master curve equation was changed and the modified curve was applied to the fracture toughness test results of model alloys that have various chemical compositions. It was found that the modified curve provided a better description for the overall fracture toughness behavior and adequate T 0 determination for the tempered martensitic SA508 Gr.4N steels. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect