Determining Coolant Flow Rate Distribution In The Fuel-Modified TRIGA Plate Reactor
| Autor: | Endiah Puji Hastuti, S. Geni Rina, M. Darwis Isnaini, Surip Widodo, B. Syaiful |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
History
Materials science 020209 energy Drop (liquid) Shutdown Nuclear engineering chemistry.chemical_element 02 engineering and technology Coolant flow rate Uranium Enriched uranium 01 natural sciences 010305 fluids & plasmas Computer Science Applications Education TRIGA Coolant chemistry 0103 physical sciences 0202 electrical engineering electronic engineering information engineering Nucleate boiling |
| Zdroj: | Journal of Physics: Conference Series. 962:012045 |
| ISSN: | 1742-6596 1742-6588 |
| DOI: | 10.1088/1742-6596/962/1/012045 |
| Popis: | TRIGA 2000 reactor in Bandung is planned to have the fuel element replaced, from cylindrical uranium and zirconium-hydride (U-ZrH) alloy to U3Si2-Al plate type of low enriched uranium of 19.75% with uranium density of 2.96 gU/cm3, while the reactor power is maintained at 2 MW. This change is planned to anticipate the discontinuity of TRIGA fuel element production. The selection of this plate-type fuel element is supported by the fact that such fuel type has been produced in Indonesia and used in MPR-30 safely since 2000. The core configuration of plate-type-fuelled TRIGA reactor requires coolant flow rate through each fuel element channel in order to meet its safety function. This paper is aimed to describe the results of coolant flow rate distribution in the TRIGA core that meets the safety function at normal operation condition, physical test, shutdown, and at initial event of loss of coolant flow due power supply interruption. The design analysis to determine coolant flow rate in this paper employs CAUDVAP and COOLODN computation code. The designed coolant flow rate that meets the safety criteria of departure from nucleate boiling ratio (DNBR), onset of flow instability ratio (OFIR), and ΔΤ onset of nucleate boiling (ONB), indicates that the minimum flow rate required to cool the plate-type fuelled TRIGA core at 2 MW is 80 kg/s. Therefore, it can be concluded that the operating limitation condition (OLC) for the minimum flow rate is 80 kg/s; the 72 kg/s is to cool the active core; while the minimum flow rate for coolant flow rate drop is limited to 68 kg/s with the coolant inlet temperature 35°C. This thermohydraulic design also provides cooling for 4 positions irradiation position (IP) utilization and 1 central irradiation position (CIP) with end fitting inner diameter (ID) of 10 mm and 20 mm, respectively. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|