Influence of the area of the sections of an unremelted production joint on the properties of weld joints of a bimetal

Autor:	V. M. Leibzon, E. Kh. Pavlova, A. Pavlov
Rok vydání:	1986
Předmět:	Heat-affected zone Materials science General Chemical Engineering Metallurgy Weldability Energy Engineering and Power Technology Welding Electric resistance welding Bimetal law.invention Fuel Technology Geochemistry and Petrology law Arc welding Energy source Joint (geology)
Zdroj:	Chemical and Petroleum Engineering. 22:236-238
ISSN:	1573-8329 0009-2355
DOI:	10.1007/bf01150322
Popis:	An investigation was made of the influence of the basic production parameters of the welding conditions on the area of the unremelted portion of the production joint and the interrelationship of this area and the indices determining the service reliability of the weld joint is established. In the experiments a 14 mm thick 16GS + 12Kh18N10T bimetal, 4 mm diam. Sv-08Kh25N13BTYu and Sv-03MYu welding wire, 5 mm diam. Sv-08A welding wire, and AN-26s and AN-348A welding fluxes were used. The plan of assembly and the order of applying the weld joints are shown. An analysis of the results showed that the basic parameters of the welding conditions presented have an insignificant influence on the area of the unremelted portions of the production joint. On the basis of data obtained, recommendations have been developed on the use of the welding variation with use of a production joint in production of chemical and petroleum apparatus.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::c82079bb27e368cbe5b404dae41372d4 https://doi.org/10.1007/bf01150322 Zobrazit plný text záznamu Full text from SpringerLink