Forming the profile of cutting tools for manufacture of fine-module ratchet teeth

Autor:	S. I. Koryagin, N. L. Velikanov, O. V. Sharkov
Rok vydání:	2021
Předmět:	010302 applied physics Computer science 0103 physical sciences Ratchet Mechanical engineering 02 engineering and technology 021001 nanoscience & nanotechnology 0210 nano-technology 01 natural sciences Special geometry
Zdroj:	Materials Today: Proceedings. 38:1437-1440
ISSN:	2214-7853
DOI:	10.1016/j.matpr.2020.08.121
Popis:	Features of the geometric characteristics of fine-module ratchet teeth necessitates the use of cutting tools with special geometry of cutting edges for their manufacture. The article describes the method of shaping the cutting edges of two types of tools used to cut fine-module ratchet teeth on cylindrical surfaces by the generating method - cutter and rack-type cutter. It is shown that the calculated theoretical profile of the front and back edges of the cutting teeth can be approximated by rectilinear surfaces. Moreover, the deviations of the actual profile from the theoretical one are insignificant: 0.2–0.4% for the cutter and 0.3–0.4% for the rack-type cutter. Examples of calculating the geometric parameters of the cutter and the rack-type cutter for cutting ratchet teeth with 0.5 mm module are given.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::c80e1f1c59e8d88b86692c49914fa582 https://doi.org/10.1016/j.matpr.2020.08.121 Zobrazit plný text záznamu Full Text from ScienceDirect