Key factors in the clogging process of horizontal subsurface flow constructed wetlands receiving anaerobically treated sewage
Autor: | L.M. Costa, Antonio Teixeira de Matos, T.D. Souza, M. von Sperling, Mateus Pimentel de Matos, Suymara Toledo Miranda |
---|---|
Rok vydání: | 2017 |
Předmět: |
Environmental Engineering
Waste management business.industry 0208 environmental biotechnology Environmental engineering Sewage 02 engineering and technology 010501 environmental sciences Management Monitoring Policy and Law 01 natural sciences Substrate (marine biology) 020801 environmental engineering Clogging Wastewater Volume (thermodynamics) Ground granulated blast-furnace slag Void (composites) Environmental science business Subsurface flow 0105 earth and related environmental sciences Nature and Landscape Conservation |
Zdroj: | Ecological Engineering. 106:588-596 |
ISSN: | 0925-8574 |
Popis: | The influent solids load, biofilm formation and occupation of void spaces by precipitates have been identified as major contributors to clogging the pores of horizontal subsurface flow constructed wetlands (HSSF-CWs). Several publications suggest that most of the accumulated material is inorganic, and this indicates that wear of the substrate may be an important constituent of clogging. The objective of this study was to characterize, in mineralogical, physical (specific mass) and chemical terms (neutralization power and volatile and fixed solids) the clogging material from the pores and the substrate medium (blast furnace slag) in two small full-scale HSSF-CWs, one planted with cattail ( Typha latifolia ) and another kept unplanted. The system received urban wastewater pre-treated in an upflow anaerobic sludge blanket reactor, was operating for seven years and showed signs of heavy clogging leading to overland flow. Samples were collected at intermediate points along the two units in order to identify the origin of the accumulated material and thereby enable the proposition of a conceptual model for the clogging process of these systems. The results indicated that most of the mass of clogging solids were inorganic and originated from wear of the substrate. However, the volume occupied by the organic solids was larger, and those were the major contributors to the clogging process. |
Databáze: | OpenAIRE |
Externí odkaz: |