Torsion Of Solid Rods with Account for the Different Resistance of the Material to Tension and Compression Under Creep
| Autor: | A. Yu. Larichkin, I. A. Banshchikova |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
Materials science
Mechanical Engineering Alloy Titanium alloy Torsion (mechanics) 02 engineering and technology engineering.material Condensed Matter Physics 01 natural sciences Power law Rod 010305 fluids & plasmas 020303 mechanical engineering & transports 0203 mechanical engineering Creep Mechanics of Materials 0103 physical sciences engineering Composite material Anisotropy Normal |
| Zdroj: | Journal of Applied Mechanics and Technical Physics. 59:1067-1077 |
| ISSN: | 1573-8620 0021-8944 |
| DOI: | 10.1134/s0021894418060123 |
| Popis: | Experiments on tension and compression of solid samples cut out from a 60-mm thick plate of an Ti–Al–Sn–V alloy at a temperature of 700◦C are used to determine that this alloy possesses small anisotropy and a different resistance to tension and compression under creep. The approximations of the power law of creep are obtained for each series of these experiments and each direction in the plate. Two models based on the transformed space of stresses are used to simulate the torsion of solid samples. The models account for the different resistance to tension and compression under creep. A series of experiments are carried out on the torsion of solid round rods cut out in the normal direction of the plate. It is shown that the computational and experimental results satisfactorily agree. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|