Rotating Bending Fatigue Endurance and Effect of Controlled Corrosion on the AISI-SAE 6063-T5 Aluminum Alloy

Autor:	J. J. Villalón López, G.M. Domínguez Almaraz, J. L. Ávila Ambriz, E. Cadenas Calderón
Rok vydání:	2012
Předmět:	Surface corrosion Materials science Environmental humidity Metallurgy Alloy Bending fatigue chemistry.chemical_element Hydrochloric acid engineering.material Corrosion chemistry.chemical_compound chemistry Aluminium engineering Bending fatigue test
Zdroj:	MRS Proceedings. 1373
ISSN:	1946-4274 0272-9172
DOI:	10.1557/opl.2012.308
Popis:	Rotating bending fatigue test are carried out on the aluminum alloy 6063-T5 for corroded and non corroded specimens. Special attention is devoted to fatigue endurance reduction caused by controlled surface corrosion on corroded specimens. Corrosion attack is implemented by submersion of specimens in an acid solution for: two, four and six minutes in order to induce three degrees of surface corrosion. The corrosion agent is a solution of hydrochloric acid with a PH close to 0.8 and solution concentration of 38%. Rotating bending fatigue tests at frequency of 50 Hz, room temperature and without environmental humidity control are carried out on 4 types of specimens: without corrosion and 2, 4, and 6 minutes immersed in the solution of hydrochloric acid. Results are analyzed regarding the corrosion effect on fatigue endurance and conclusion are enlisted concerning rotating bending fatigue tests and corrosion attack on this aluminum alloy.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::c436304ac7c5a287b97d5e6cff75379f https://doi.org/10.1557/opl.2012.308 Zobrazit plný text záznamu Full text from SpringerLink