P-Nitrophenol Electro-Oxidation on a BTMA+-Bentonite-Modified Electrode

Autor: Dušan Jovanović, Aleksandra Milutinović-Nikolić, M. Žunić, A. Abu Rabi-Stanković, Zorica Mojović, N. Jović-Jovičić, Predrag Banković
Rok vydání: 2012
Předmět:
Zdroj: Clays and Clay Minerals. 60:291-299
ISSN: 1552-8367
0009-8604
DOI: 10.1346/ccmn.2012.0600306
Popis: Phenol and its derivatives are regarded as ‘priority pollutants’ and p-nitrophenol (p-NP), in particular, is of great interest due to its toxicity and frequent presence in waste waters and fresh waters. Straightforward, inexpensive methods to identify p-NP in water, however, is lacking. In the present study, an electrochemical technique using clay-modified electrodes to measure p-NP was investigated as a potentially promising method to fill that gap. A glassy carbon electrode (GCE) was modified with a thin layer of Na-enriched bentonite and a series of benzyltrimethylammonium (BTMA+)-bentonites (BTMA+-B) in order to confirm these materials as p-NP electrosensitive. A series of organobentonites was synthesized using different BTMA+/bentonite ratios. The materials obtained were characterized using X-ray diffraction, Fourier-transform infrared spectroscopy, and a low-temperature nitrogen adsorptiondesorption method. A monolayer arrangement of BTMA+ within the interlamellar region of beidellite-rich smectite was confirmed. Deterioration of the textural properties was observed with increase of BTMA+ loading. The electro-oxidation of p-NP in an acidic medium on BTMA+-B-modified GCE was investigated. The cyclic voltammetry method with a three-electrode cell was used. The reference electrode was Ag/AgCl in 3 M KCl and a Pt foil was the counter electrode. For each electrochemical measurement, a different BTMA+ loading in BTMA+-B was used as the material for GCE coating and applied as the working electrode. The electrochemical activity of BTMA+-B-based electrodes increased with BTMA+ loading. The results confirmed that the organophylic character of the BTMA+-B-modified surface was the main influence on the electrochemical activity of the BTMA+-B-based GCE; the influence of textural properties was almost negligible. The increased electrode activity toward p-NP was achieved by the adsorption of p-NP on the electrode surface, the process that commonly precedes the electro-oxidation. The present study showed that synthesized materials could potentially be used in an electrochemical test for the presence of p-NP in water solutions.
Databáze: OpenAIRE
Externí odkaz: