Composite steel-framed structures in fire with protected and unprotected edge beams
| Autor: | Susan Lamont, Asif Usmani, Martin Gillie |
|---|---|
| Rok vydání: | 2007 |
| Předmět: |
Materials science
business.industry Metals and Alloys Building and Construction Structural engineering Edge (geometry) Span (engineering) Composite construction Mechanics of Materials Fire protection Ultimate tensile strength Catenary Slab Physics::Accelerator Physics Composite material business Beam (structure) Computer Science::Cryptography and Security Civil and Structural Engineering |
| Zdroj: | Journal of Constructional Steel Research. 63:1138-1150 |
| ISSN: | 0143-974X |
| DOI: | 10.1016/j.jcsr.2006.10.001 |
| Popis: | The structural behaviour of a steel–concrete composite frame subject to a natural fire is analysed using a numerical model. The behaviour is compared when fire protection is applied to only the external beams and when no beams are fire protected. The behaviour of the structure in the two cases is significantly different. When the edge beams are protected the floor slab tends to span in 2 directions because the edge beams provide sufficient support around the perimeter of the floor for tensile membrane action to develop. When the edge beams are unprotected the slab tends to span in only one direction in a manner similar to a beam in catenary action. Catenary action is a weaker load carrying mechanism than tensile membrane action. As a consequence of the weaker mechanism, when the edge beams are unprotected, the columns displace inwards towards the end of the fire indicating the possibility of imminent runaway collapse. The pattern of mechanical strains in the floor slab reinforcement depends on the load carrying mechanism and therefore on whether edge beam protection is included. Although the average mechanical tensile strains are higher when the edge beams are protected the highest strains occur when the beams are unprotected. Conversely, an instability in the primary beam occurs at much lower temperatures when the edge beams are protected. It is concluded that fire protecting the edge beams of the structural layout studied has a number of effects on the fire resistance of the structure, some beneficial, some detrimental, however, in general, fire protecting the edge beams provides an increased level of fire resistance. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect