Ultradrawing and ultimate tensile properties of novel ultra-high molecular weight polyethylene composite fibers filled with nanoalumina fillers
| Autor: | Shih-Hsuan Chiu, Dao-Huan Ren, Jen-Taut Yeh, Chuen kai Wang, Chih-Chen Tsai |
|---|---|
| Rok vydání: | 2016 |
| Předmět: |
Ultra-high-molecular-weight polyethylene
Materials science Polymers and Plastics Composite number 02 engineering and technology Polyethylene 010402 general chemistry 021001 nanoscience & nanotechnology 01 natural sciences 0104 chemical sciences chemistry.chemical_compound chemistry Ultimate tensile strength Chemical Engineering (miscellaneous) Surface modification Composite material 0210 nano-technology |
| Zdroj: | Textile Research Journal. 86:1768-1787 |
| ISSN: | 1746-7748 0040-5175 |
| DOI: | 10.1177/0040517515573408 |
| Popis: | Novel ultra-high molecular weight polyethylene (UHMWPE)/nanoalumina (F100Ay), UHMWPE/acid-treated nanoalumina (F100Aox%-8-y) and UHMWPE/functionalized nanoalumina (F100Aox%-81PEg-MAHxy) as-prepared nanocomposite fibers were prepared by gel-spinning processes. The rod-like features of the original nanoalumina fillers were significantly etched into broken/shorter nanorods and/or shreds by oxalic acid solutions as their concentrations and/or treating time increased. As evidenced by Fourier transform infrared and transmission electron microscopy analysis, PEg-MAH molecules were successfully grafted onto acid-treated nanoalumina fillers through the reaction of the hydroxyl groups of nanoalumina fillers with the maleic anhydride groups of PEg-MAH molecules during their modification processes. The specific surface areas of each Aox%-81PEg-MAHxy functionalized nanoalumina filler reached a maximum value (≧470 m2/g), as the weight ratios of PEg-MAH to acid-treated nanoalumina approached the optimal value at 8. The achievable draw ratio ( Dra) values of F100Ay, F100Aox%-8-y and/or F100Aox%-81PEg-MAHxy as-prepared fibers approach a maximal value as the original, acid-treated and/or functionalized nanoalumina contents reach the optimal values at 0.1, 0.1 and 0.075 phr, respectively, in which, the maximal Dra values obtained for F100Aox%-81PEg-MAHx0.075 as-prepared fiber specimens are significantly higher than those of the F100A0.1 and F100Aox%-8-0.1 drawn fiber specimens prepared at the same draw ratios. Moreover, the maximal Dra values obtained for F100Aox%-81PEg-MAHx0.075 as-prepared fibers reached another maximal value as the functionalized nanoalumina fillers were modified using the optimal weight ratio of PEg-MAH to acid-treated nanoalumina at 8. Further investigation revealed that excellent orientation and tensile properties of the UHMWPE nanocomposite fibers can be obtained by ultradrawing the F100Aox%-81PEg-MAHxy as-prepared fibers with proper amounts of well-dispersed functionalized nanoalumina fillers. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|