| Autor: |
Michael Trompeter, Alexander Brosius, A. E. Tekkaya, V. Franzen, Jörg Witulski |
| Rok vydání: |
2010 |
| Předmět: |
|
| Zdroj: |
International Journal of Machine Tools and Manufacture. 50:969-976 |
| ISSN: |
0890-6955 |
| DOI: |
10.1016/j.ijmachtools.2010.08.001 |
| Popis: |
In this paper, macroscopic textured tool surfaces manufactured by rolling are investigated. Focus is on selective adjustment of friction by local texturing of tool areas to influence the material flow during deep drawing operations. Flat strip drawing tests were performed using friction elements with open textures. The texturing influences the friction conditions and affects the material properties of the stripes. The use of these surfaces results in a significant increase in friction, which allows an additional control of the material flow during sheet drawing operations. The main mechanisms for increased drawing forces are elastic deformation near the area of the texture and local plastic deformation on the sheet surface. Using strips made of mild steel, the texturing leads to an increased roughness of the sheet metal surface and, in the case of high surface pressure, to plastic deformations of the strips. Compared to conventional measures like draw beads, rolled-textured surfaces allow to retard the material flow during sheet drawing operation without excessive strain hardening in the sheet material. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect