Unit with a device for directional feeding of rocks with a shale structure
| Autor: | M. A. Romanovich, A. A. Romanovich, E. I. Chekhovskoy, Ebrahim Amini |
|---|---|
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | Journal of Physics: Conference Series. 1926:012027 |
| ISSN: | 1742-6596 1742-6588 |
| DOI: | 10.1088/1742-6596/1926/1/012027 |
| Popis: | The paper analyzes the properties of rocks with a shale structure, justifies the need to apply force in the direction of the lowest strength. The list of crushing equipment used in the process of obtaining cube-shaped crushed stone is given. It is established that the existing crushing equipment is not able to take into account the specific texture of the crushed materials and this does not allow obtaining cube-shaped crushed stone from shale materials. A description of the new design of the press-roll unit, which allows obtaining cuboid crushed stone from rocks with a shale structure, is given. The press-roll unit includes a device for directional feeding of shale materials to its working bodies, which create a force effect on the fed pieces of rock in the required direction. The design of the tooth of the working body is described, which allows to reduce significantly the replacement time of worn elements and reduce the bending loads acting on it. This leads to an increase in the reliability of the structure and reduces the metal consumption of repairs. A mathematical model of the directional movement of shale materials in a roll device is considered and an equation for calculating the required force is obtained. Graphical dependences of the influence of the roller installation angle and its horizontal and vertical displacement on the amount of deformation of the feed material layer are presented. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|