Heat transfer and frictional pressure drop during condensation in plate heat exchangers: Assessment of correlations and a new method
Autor: | Carlos A. Infante Ferreira, Tao Xuan |
---|---|
Rok vydání: | 2019 |
Předmět: |
Fluid Flow and Transfer Processes
Pressure drop Materials science 020209 energy Mechanical Engineering Condensation Plate heat exchanger 02 engineering and technology Mechanics Heat transfer coefficient 021001 nanoscience & nanotechnology Condensed Matter Physics Heat transfer 0202 electrical engineering electronic engineering information engineering Range (statistics) 0210 nano-technology |
Zdroj: | International Journal of Heat and Mass Transfer. 135:996-1012 |
ISSN: | 0017-9310 |
DOI: | 10.1016/j.ijheatmasstransfer.2019.01.132 |
Popis: | The corrugation channels of plate heat exchangers enhance the heat transfer and complicate the prediction of heat transfer coefficients and frictional pressure drop. This paper reviews the heat transfer and frictional pressure drop correlations for condensation in plate heat exchangers, and classifies the correlations into basic forms. An experimental database is developed including the data of HFCs, hydrocarbons, HFOs and CO2. The mass fluxes are in the range of 2–150 kg·m−2·s−1. The chevron angles and hydraulic diameters are distributed in 25.7°–70° and 3.23–8.08 mm. The saturated temperatures are −34.4 to 72.1 °C, while the reduced pressures are from 0.03 to 0.49. Eight heat transfer correlations are assessed with the database. The correlation of Longo et al. [48] predicts the experimental data best, while the correlation of Kuo et al. [16] shows the second best performance. Six frictional pressure drop correlations are compared with the database. The prediction of frictional pressure drop is relatively poor, and a new correlation is developed using multi-variable regression analysis with non-dimensional numbers. This new correlation predicts 87.5% of the experimental data within ±50%. |
Databáze: | OpenAIRE |
Externí odkaz: |