Thermal analysis of friction welding process in relation to the welding of YSZ-alumina composite and 6061 aluminum alloy
| Autor: | Ahmad Badri Ismail, Hussain Zuhailawati, M.B. Uday, M.N. Ahmad Fauzi |
|---|---|
| Rok vydání: | 2012 |
| Předmět: |
Heat-affected zone
Plastic welding Filler metal Materials science Gas tungsten arc welding Metallurgy General Physics and Astronomy Surfaces and Interfaces General Chemistry Welding Condensed Matter Physics Electric resistance welding Surfaces Coatings and Films law.invention law Cold welding Friction welding |
| Zdroj: | Applied Surface Science. 258:8264-8272 |
| ISSN: | 0169-4332 |
| DOI: | 10.1016/j.apsusc.2012.05.035 |
| Popis: | The objective of this work is to establish an analytical data for heat generation by friction welding, based on different parameters of the contact condition between two dissimilar materials. The ceramic composite of Al2O3–YSZ and 6061 Al alloy, which is the example of joining materials by friction welding was used in the experiments. Alumina rods containing 0, 25 and 50 wt% yttria stabilized zirconia were produced by slip casting in Plaster of Paris molds and subsequently sintered at 1600 °C. The diameter of both the ceramic and metal rods was 16 mm. Rotational speeds for friction welding were between 630 and 2500 rpm. As a result, different data was evaluated for obtaining joint properties and operating conditions, and obtained results are useful in modeling the welding process and reliability joint under various conditions. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect