Effect of Second Phases on Tensile Property in Artificial Ageing and RRA Process of Super-High Strength Aluminum Alloy
| Autor: | Zhi Yi Liu, Chun Feng, Su Min Zeng, Ai Lin Ning |
|---|---|
| Rok vydání: | 2007 |
| Předmět: |
Materials science
Mechanical Engineering Alloy Metallurgy chemistry.chemical_element Slip (materials science) engineering.material Condensed Matter Physics Brittleness chemistry Mechanics of Materials Aluminium Ageing visual_art Ultimate tensile strength Aluminium alloy visual_art.visual_art_medium engineering General Materials Science Tensile testing |
| Zdroj: | Materials Science Forum. :855-862 |
| ISSN: | 1662-9752 |
| DOI: | 10.4028/www.scientific.net/msf.546-549.855 |
| Popis: | The evolution of second phases and its effect on tensile mechanical property in artificial ageing and RRA process of super-high strength aluminum alloy is investigated.The result of tensile test shows that the samples of Al-Zn-Mg-Cu-Ag alloy aged at lower temperature(100°C) not only have higher tensile strength up to 753Mpa but also relatively higher tensile elongation above 9% than normal temperature(120°C) in artificial ageing. The sample of Al-Zn-Mg-Cu alloy has the highest tension strength upto 788Mpa when aged at 100°C for 48 hours in single step of artificial ageing. Further more in RRA process samples of Al-Zn-Mg-Cu alloy preaged at 100°C for 24 hours retrogressed at 200°C for 7min and reaged at 100°Cfor 24 hours present the best tensile strength of 795Mpa than others. The tensile strength of Al-Zn-Mg-Cu alloy after RRA treated decreases with prolonging of retrogression time and reageing time starting from 7mins and 24 houres respectively. SEM observation shows that crack of the samples in tensile test is created at large particles in the fracture while there are more particles of undissolved phase in Al-Zn-Mg-Cu alloy containing Ag. TEM observation shows that the dominant strengthening particle corresponding to the peak strength of Al-Zn-Mg-Cu alloy containing Ag when aged at 120°C for 8 hours is η’ phase while dominant strengthening particle is G.P zone when aged at 100°C for 80 hours. However, η’ phase as the dominant strengthening particles corresponds to the peak strength of Al-Zn-Mg-Cu alloy without content of Ag when aged at 100°C for 48hours. TEM observation also shows that G.P zone as strengthening particle is dominant in the samples of Al-Zn-Mg-Cu alloy reaged at 100°C for 24 hours, and strengthening particles is coarsened when the sample is retrogressed at 200°C and reaged for a longer time. It is suggested that whether at the presence of coarse particles of undissolved phases or when G.P zone and η’ particle grow up in the retrogression ,sample needs deformable G.P zone instead of undeformable η’ in subsequent artificial ageing and reageing as dominant strengthening particle, in order to present a larger freedom spacing for dislocation to slip and let the sample not to behave too brittle to display high resistance to imposed plastic deformation or high tensile strength. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|