Optimization of Landfarming Amendments Based on Soil Texture and Crude Oil Concentration

Autor: Diego E. Guerrero, J.F. Llamas, David Bolonio, José Luis R. Gallego, Laureano Canoira, Marcelo F. Ortega, María J. García-Martínez
Rok vydání: 2018
Předmět:
Zdroj: Water, Air, & Soil Pollution. 229
ISSN: 1573-2932
0049-6979
DOI: 10.1007/s11270-018-3891-1
Popis: This work examines the rates of bioremediation during a landfarming process. A field study was performed using three types of soil, which were contaminated with two different hydrocarbon concentrations: 20,000 and 50,000 ppm of total petroleum hydrocarbons (TPH). They were subjected to landfarming under the action of different treatments, based on the provision of irrigation, aeration by rototilling, fertilizer, and surfactant. The biodegradation of TPH, considering concentration and families of hydrocarbon compounds (including polycyclic aromatic hydrocarbons, PAHs), was precisely measured for a period of 486 days. The results show how biodegradation rates depend on soil texture, initial contamination level, and type of amendment. Thus, the combination of fertilizer, irrigation, and aeration was the best treatment for treating the soil contaminated with 20,000 ppm of TPH (TPH final concentrations were reduced to a range of 49 to 62% depending on the soil texture). In the case of parcels contaminated with 50,000 ppm of TPH, the most effective treatment combined the supply of fertilizer, surfactant, irrigation, and aeration (TPH final concentrations were reduced to a range of 47 to 63%, depending on the soil texture). The best biodegradation results are obtained for soils with coarser textures and using the treatment with fertilizer, irrigation, and aeration. In addition, the application of surfactant did not imply a significant improvement in the level of biodegradation of hydrocarbons in soil contaminated with 20,000 ppm of TPH, whereas in soils contaminated with 50,000 ppm of TPH, it played a leading role.
Databáze: OpenAIRE
Externí odkaz: