| Autor: |
Dongcheol Kim, Yeong-Do Park, Dae-Geun Nam, Jong Woo Son |
| Rok vydání: |
2010 |
| Předmět: |
|
| Zdroj: |
Journal of the Korean Welding and Joining Society. 28:66-73 |
| ISSN: |
1225-6153 |
| DOI: |
10.5781/kwjs.2010.28.2.066 |
| Popis: |
Conventional fracture test of resistance spot weld had been performed without consideration of paint baking process in automobile manufacturing line. This study was aim to investigate the effect of paint baking on fracture mode and load carrying capacity in fracture test for resistance spot welded 780TRIP steels. With paint baking cycle after resistance spot welds, peel tests and microhardness were conducted on the as-welded and baked samples. Resistance spot welds in AHSS (Advanced High Strength Steels) are prone to display partial interfacial fractures during fracture test or vehicle crash. Baking cycle increased the load-carrying capacity of the resistance spot welded samples and improved the fracture appearance from partial to full button fracture for the L-type peel tests. Specially, the differences in fracture appearance are apparent when the nugget size of spot welds is small enough to produce the partial interfacial fracture. The comparison of macrohardness and microstructure between as-welded and baked samples showed that there are no large difference in change the fracture mode. However, the results of the instrumented indentation test suggested that fusion zone and HAZ of baked sample have less tensile and yield strength and proves that the tempering effects are applied and enhanced the resistance to fracture on welds with application of baking cycle. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
