Vacuum Brazing Incoloy 800 Using the Copper Foil

Autor:	R.K. Shiue, Cheng Yen Wang
Rok vydání:	2015
Předmět:	Materials science Metallurgy Alloy General Engineering chemistry.chemical_element engineering.material Microstructure Copper Vacuum furnace chemistry Dimple engineering Brazing Composite material FOIL method Incoloy
Zdroj:	Advanced Materials Research. 1101:99-103
ISSN:	1662-8985
DOI:	10.4028/www.scientific.net/amr.1101.99
Popis:	The purpose of this research is focused on vacuum furnace brazing Incoloy 800 (IN-800) using the copper filler foil. Microstructural evolution and shear strength of brazed joints for various brazing conditions has been evaluated in the experiment. The Cu-rich matrix dominates entire brazed joint. The width of Cu-rich matrix is decreased with increasing the brazing temperature and/or time. Average shear strength of the joint is approximately 215 MPa. Dimple dominated fracture is widely observed for the specimen brazed below 1160oC. However, cleavage dominated fracture is found for the specimen brazed at 1200oC. It is advised that copper brazing IN-800 alloy should be confined below 1160oC.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::b8ff17c358f3fd3e9a7ca9aded307f7e https://doi.org/10.4028/www.scientific.net/amr.1101.99 Zobrazit plný text záznamu