Impacts of low-pressure (LP) compressors’ fouling of a turbofan upon operational-effectiveness of a military aircraft
Autor: | Muhammad Ferjad Naeem |
---|---|
Rok vydání: | 2008 |
Předmět: |
Operating point
Engineering Fouling business.industry Mechanical Engineering ComputerApplications_COMPUTERSINOTHERSYSTEMS Thrust Building and Construction Management Monitoring Policy and Law Aircraft fuel system Automotive engineering Turbofan General Energy Operational effectiveness business Gas compressor Bespoke |
Zdroj: | Applied Energy. 85:243-270 |
ISSN: | 0306-2619 |
DOI: | 10.1016/j.apenergy.2007.02.011 |
Popis: | Some in-service deterioration in any mechanical device, such as an aircraft’s gas-turbine engine, is inevitable. However, its extent and rate depend upon the qualities of design and manufacture, as well as on the maintenance/repair practices followed by the users. As a result of experiencing deterioration (of the engine as a whole or any of its components individually), an engine will seek a different steady operating point relative to that for an engine with no deterioration. This results in changes in the available thrust from the engine(s) at the same TETs and/or rotational-speeds. Any reduction in the available thrust at specified engine settings, especially maximum available thrust from the engines, will have a significant adverse effect upon the aircraft’s operational-performance. These adverse effects can be reduced by having a better knowledge of the effects of each such deterioration on the aircraft’s operational-performance. Subsequently improvements can be made in the design and manufacture of adversely-affected components as well as in maintenance and repair practices. For a military aircraft’s mission-profile (consisting of several flight-segments), using a bespoke computer simulation, the consequences of low-pressure compressors’ fouling of a turbofan upon the aircraft’s mission operational-effectiveness have been predicted. This will help in making wiser management decisions, such as whether to remove the aero-engines from the aircraft for maintenance or to continue using them with some changes in the aircraft’s mission-profile, or planning different take-off times and/or carrying different fuel/weapon loads for aircraft with the various extents of low-pressure compressors’ fouling. Hence improved engine utilization and the optimal mission operational-effectiveness for a squadron of aircraft can be achieved. |
Databáze: | OpenAIRE |
Externí odkaz: |