| Autor: |
Mohd Fadthul Ikmal Misnal, Norhayati Ahmad, Raja Kamarulzaman Raja Ibrahim, Norizah Redzuan, Linda Agun, Muhamad Nor Firdaus Zainal |
| Rok vydání: |
2020 |
| Předmět: |
|
| Zdroj: |
Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 70:155-167 |
| ISSN: |
2289-7879 |
| DOI: |
10.37934/arfmts.70.1.155167 |
| Popis: |
Surface cleaning is one of the critical preliminary process in wire manufacturing surface treatment for the purpose of improved surface wettability and adhesion. However, concern in terms of environmental impacts arises due to common practices of wet-chemicals which led to severe human health. Surface cleaning using cold plasma treatment might become an alternative, but it seems that the issue of gas temperature measurement and monitoring have not been dealt with in depth, since the gas temperature can indicate the type of plasma formed inside the designed reactor. Fiber Bragg grating (FBG) might became an option for gas temperature measurement and monitoring. In this research, air temperature in cold plasma treatment reactor was measured and monitored using FBG, with effects of graphene electrode. Surface roughness of metalwire surface was measured and qualitative observation through optical microscope was carried out, before and after plasma treatment for the purpose of performance evaluation. From the results, it is found that type of plasma discharge formation has been successfully identified through air temperature profiling and monitoring using FBG. Highest surface roughness reduction is performed by filamentary type of discharge of 9 kV applied voltage based on generated air temperature profile by FBG. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
