Determining the limiting factor of the electrochemical stability window for PEO-based solid polymer electrolytes: main chain or terminal –OH group?
| Autor: | Keegan R. Adair, Xuejie Gao, Ruying Li, Huan Huang, Xueliang Sun, Danni Bao, Weihan Li, Shigang Lu, Nathaniel Graham Holmes, Li Zhang, Junjie Li, Changtai Zhao, Chandra Veer Singh, Qingwen Lu, Sankha Mukherjee, Xiaofei Yang, Ming Jiang, Hui Duan, Yang Liu, Jianwen Liang, Qian Sun |
|---|---|
| Rok vydání: | 2020 |
| Předmět: |
chemistry.chemical_classification
Materials science Ethylene oxide Renewable Energy Sustainability and the Environment 02 engineering and technology Polymer Electrolyte 010402 general chemistry 021001 nanoscience & nanotechnology Electrochemistry 01 natural sciences Pollution 0104 chemical sciences Anode chemistry.chemical_compound Nuclear Energy and Engineering chemistry Chemical engineering Environmental Chemistry Hydroxide Dimethyl ether 0210 nano-technology Ethylene glycol |
| Zdroj: | Energy & Environmental Science. 13:1318-1325 |
| ISSN: | 1754-5706 1754-5692 |
| Popis: | Due to higher energy density, high-voltage all-solid-state lithium batteries (ASSLBs) have attracted increasing attention. However, they require solid-state electrolytes (SSEs) with wide electrochemical stability windows (ESW, typically >4.2 V) and high-stability against the Li anode. Nevertheless, poly(ethylene oxide) (PEO), the most widely used solid polymer electrolyte (SPE), can’t tolerate a high-voltage over 4 V. Whether the main chain (–C–O–C–) or the terminal hydroxide group (–OH) is the limiting factor for the narrow ESW remains unknown. Herein, poly(ethylene glycol) (PEG) and poly(ethylene glycol)dimethyl ether (PEGDME) with different terminal groups are selected to answer this question. The results show that the reactive terminal –OH group is the limiting factor towards applicability against high voltage and the Li anode. Replacing –OH with more stable –OCH3 can significantly extend the ESW from 4.05 to 4.3 V, while improving the Li-anode compatibility as well (Li–Li symmetric cells stably run for 2500 h at 0.2 mA cm−2). Its practical application is further proved by developing PEGDME-based ASSLB pouch cells. The 0.53 mA cm−2 Li–LiFePO4 and 0.47 mA h cm−2 Li–LiNi0.5Mn0.3Co0.2O2 cells demonstrated high capacity retention of 97% and 90% after 210 cycles and 110 cycles, respectively. This work offers a new strategy for PEO-based high-voltage ASSLB development by changing the unstable terminal groups. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|