Crack growth rate of inclined and deflected surface-cracks in round-bar specimens of copper processed by equal channel angular pressing under cyclic loading
| Autor: | J. Kitamura, Takashi Iwamura, Seung Zeon Han, Jong-Hyeon Lee, Takaei Yamamoto, Masahiro Goto, J.H. Ahn, S.S. Kim |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
010302 applied physics
Pressing Materials science Mechanical Engineering chemistry.chemical_element 02 engineering and technology Deformation (meteorology) 021001 nanoscience & nanotechnology Crack growth resistance curve 01 natural sciences Copper Crack closure chemistry Mechanics of Materials 0103 physical sciences Forensic engineering Perpendicular General Materials Science Growth rate Composite material 0210 nano-technology Stress intensity factor |
| Zdroj: | Engineering Fracture Mechanics. 182:100-113 |
| ISSN: | 0013-7944 |
| DOI: | 10.1016/j.engfracmech.2017.07.024 |
| Popis: | For low-cycle fatigued, ultrafine grained copper, processed by equal channel angular pressing, a unique crack growth direction, either inclined at 45° or perpendicular to the loading direction, was observed around the circumference of round bar specimens. In addition, the perpendicular cracks showed a 45° deflected crack face toward the center of the specimens. To clarify the growth behavior of such inclined and deflected cracks, the role of the deformation mode at the crack-tip areas was discussed in terms of the surface damage caused by cyclic stressing and the mixed-mode deformation at the crack tips. The preexistent shear-bands/shear-cracks around the crack tips and the in-plane shear-mode deformation at the crack tips assisted the formation of shallow inclined- and deep deflected-cracks. To quantitatively estimate the severity of mechanical damage at the crack tips, the comparative stress intensity factor range under combined mode I, II and III conditions were calculated. The crack growth rate along the growth direction at the surface and bottom for inclined and deflected surface-cracks was discussed in terms of the comparative stress intensity factor range. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect