| Autor: |
David Gutierrez, Nicholas Brown, Chad Hanak, Nate Anderson, Julia Vallejos, Tim Paton |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
Day 2 Wed, September 22, 2021. |
| Popis: |
High-fidelity trajectory estimation combined with dual-probe Measurement-While-Drilling (MWD) directional instrumentation provides a solution to minimum curvature’s known inefficiencies in modeling the true wellbore position and definition (Stockhausen & Lesso, 2003). While it may not be cost efficient to increase survey frequency from the industry standard of 30ft-200ft, it is possible using the techniques defined in this research to maintain current survey intervals and increase wellbore placement accuracy while reducing positional uncertainty by up to 45% over the most advanced commercially available magnetic survey correction algorithms. Taking advantage of modern MWD tool platforms enables the installation of an additional (30-inch) survey measurement probe in the existing tool string with a fixed and known offset to the primary survey probe. Directional surveys from both survey probes are telemetered to surface at traditional course length survey intervals in real-time. The two surveys along with the known steering and non-steering intervals are processed through a high-fidelity trajectory estimation algorithm to quantify the wellbore behavior between survey stations. The result is a highly accurate and dense survey listing with modeled trajectory waypoints between traditional surveys to reduce the course length between directional measurement datapoints and better capture the true well path. Through extensive lab modeling, it was determined that the use of the dual-probe MWD package in combination with the high-fidelity trajectory estimation algorithm could result in a reduction in the Ellipse of Uncertainty (EOU) by 20% in the horizontal (semi-major) plane and 45% in the vertical (semi-minor) plane when compared to Multi-Station Analysis (MSA) and BHA Sag survey correction techniques. In addition to proof-of-concept modeling, the system has been deployed and used in real-time application on three separate pads, totaling nine wells. The results were able to validate and exceed baseline goals by exhibiting, on average, a reduction of the EOU by 21% in the horizontal plane and 58% in the vertical plane. Further, True Vertical Depth (TVD) error at well Total Depth (TD) in excess of 10ft was observed on three out of nine wells (33%) in this limited real-time application study. This difference was relative to separate, concurrent processing of the surveys via Multi-Station Analysis (MSA) and BHA sag corrections. This level of increased TVD accuracy is significant in many applications, depending on zone thickness and difficulty of geological interpretation. Increased accuracy and reduced uncertainty result from a better understanding of the true well path between traditional course length surveys. The trajectory estimation algorithm quantifies the rotational build/drop and walk rates in real-time and is reinforced by the dual-probe directional survey measurements. These tendencies can be used to better project forward to the bit as the well is drilled. Improved projection to the bit allows for enhanced recognition of deviation from the well plan and better-informed steering decisions. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
