Application of Diamond-Like Nanocomposite Tribological Coatings on LIGA Microsystem Parts
| Autor: | Thomas W. Scharf, Paul G. Kotula, John R. Michael, Somuri V. Prasad, Todd R. Christenson |
|---|---|
| Rok vydání: | 2009 |
| Předmět: | |
| Zdroj: | Journal of Microelectromechanical Systems. 18:695-704 |
| ISSN: | 1941-0158 1057-7157 |
| Popis: | The major focus of this study was to examine the feasibility of applying diamond-like nanocomposite (DLN) coatings on the sidewalls of Ni alloy parts fabricated using lithographie, galvanoformung and abformung (LIGA: a German acronym that means lithography, electroforming, and molding) for friction and wear control. Planar test coupons were employed to understand the friction mechanisms in regimes relevant to LIGA microsytems. Friction tests were conducted on planar test coupons as well as between LIGA-fabricated test structures in planar-sidewall and sidewall-sidewall configurations. Measurements were made in dry nitrogen and air with 50% relative humidity by enclosing the friction tester in an environmental chamber. In contrast to bare metal-metal contacts, minimal wear was exhibited for the DLN-coated LIGA NiMn alloy parts and test coupons. The low friction behavior of DLN was attributed to its ability to transfer to the rubbing counterface providing low interfacial shear at the sliding contact. The coating coverage and chemistry on the sidewalls and the substrate-coating interface integrity were examined by transmission electron microscopy, Automated eXpert Spectral Image Analysis, and electron backscatter diffraction on cross sections prepared by focused ion beam microscopy. The role of novel characterization techniques to evaluate the surface coatings for LIGA microsystems technology is highlighted. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|