Influence of Weave Parameters on Woven Fabric Tear Strength
| Autor: | Ginta Laureckienė, Rimvydas Milašius, Brigita Legaudienė |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
Tear resistance
Materials science 020401 chemical engineering Materials Science (miscellaneous) Woven fabric 02 engineering and technology 0204 chemical engineering Business and International Management Composite material 021001 nanoscience & nanotechnology 0210 nano-technology Industrial and Manufacturing Engineering General Environmental Science |
| Zdroj: | Fibres and Textiles in Eastern Europe. 26:48-51 |
| ISSN: | 1230-3666 |
| Popis: | The influence of weave on woven fabric tear strength is analysed in this paper. Brierlay’s factor Fm, Milašius’ factor P and P’ and modification of parameter P made by the authors (P’weft) were used in the investigations presented. Woven fabrics of 100 % viscose multifilament yarn manufactured from the same yarns and with the same density but with seven different weaves (plain weave, weft rib 2/2, warp rib 2/2, twill 2/2, twill 3/1, basket weave 2/2 and 4 healds sateen) were used for the investigations. It was stated that the well-known weave parameters of Brierley Fm and Milašius P and P’ cannot be used for the prediction of the tear strength of all kinds of weaves without any limitations. All parameters presented can be used for the strength prediction of a weave when they are divided into two groups – a rib-based group and twill-based group. Prediction of the tear strength for rib-based weaves in the weft has to be carried out using parameter P’weft, where the influence of parameters P1 and P is varied. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|