A dynamic stall model for analysis of cross-flow turbines using discrete vortex methods
Autor: | Raul Urbina, Richard W. Kimball, Brenden P. Epps, Michael L. Peterson |
---|---|
Rok vydání: | 2019 |
Předmět: |
Tip-speed ratio
060102 archaeology Turbine blade Renewable Energy Sustainability and the Environment Computer science Angle of attack 020209 energy Stall (fluid mechanics) 06 humanities and the arts 02 engineering and technology Mechanics Curvature Turbine law.invention Physics::Fluid Dynamics Flow separation Camber (aerodynamics) law 0202 electrical engineering electronic engineering information engineering 0601 history and archaeology |
Zdroj: | Renewable Energy. 130:1130-1145 |
ISSN: | 0960-1481 |
DOI: | 10.1016/j.renene.2018.07.153 |
Popis: | Cross-flow turbine blades operate in an unsteady environment over large ranges of angle of attack and Reynolds number, often enduring dynamic stall. The hydrodynamics are further complicated because the circular orbit of the blades changes their effective curvature. In order to address these technical challenges with modeling cross-flow turbines, this article presents a novel dynamic stall model with flow curvature correction. The dynamic stall model extends Beddoes-Leishman dynamic stall theory, including several effects such as proper asymptotic behavior at large (∼90°) angles of attack, influence of reduced-pitch rate on the stall angle, dynamics of the flow separation point, and changes in effective camber due to flow curvature. Further, the model enables rapid hydrodynamic analysis of cross-flow turbines using free vortex methods. Important design parameters such as blade thickness and camber are explicitly accounted for in the model, which enables parametric study of turbine configurations and therefore makes the model useful for system-level turbine optimization. Numerical predictions are validated by experimental data for several cases, including ranges of blade profile, toe angle, solidity, and tip speed ratio. |
Databáze: | OpenAIRE |
Externí odkaz: |