Rheology of unsaturated polyester resins. II. Thickening behavior of unsaturated polyester and vinyl ester resins

Autor: Kwok-Wai Lem, Chang Dae Han
Rok vydání: 1983
Předmět:
Zdroj: Journal of Applied Polymer Science. 28:763-778
ISSN: 1097-4628
0021-8995
DOI: 10.1002/app.1983.070280229
Popis: The rheological properties of mixtures of unsaturated polyester resin and viscosity thickener were determined as thickening progressed. Two commercially available resins were used: (1) general purpose unsaturated polyester resin (Ashland Chemical, Aropol 7030), and (2) vinyl ester resin (Dow Chemical, XD-7608.05). As thickening agent, a magnesium oxide (MgO) paste dispersed in styrene monomer was used. No fillers, pigments, or other additives were used. During thickening, the following measurements were also made: (1) acid number by titration and (2) molecular weights by gel permeation chromatography (GPC). For the Ashland Chemical polyester resin, it was found that, over a period of 300 h, the titration method indicated that the number-average molecular weight (Mn) increased by a factor of 2 and the weight-average molecular weight (Mw) increased by a factor of 3. The GPC measurements, however, showed that Mn increased very little whereas Mw increased by a factor of about 2. Over the same period, the viscosity of the Ashland Chemical polyester resin increased from 0.9 N·s/m2 (9 P) to 104 N·s/m2 (105 P), and the viscosity of the Dow Chemical vinyl ester resin increased from 0.7 N·s/m2 (7 P) to 2 × 103 N·s/m2 (2 × 104 P). Such a large increase in viscosity cannot be explained by the existing molecular theory, in view of the fact that the molecular weights increased relatively little. We speculate that the exceedingly large increase in viscosity during thickening is attributable primarily to ionic associations between the carboxylic anions and the magnesium ions, rather than to the formation of chain branching suggested in the literature. It was found further that mixtures of polyester resins and viscosity thickener exhibit normal stress effects, increasing with thickening time and following the behavior of a second-order fluid when the first normal stress difference was plotted against shear rate. Interestingly enough, however, plots of first normal stress difference vs. shear stress yield a correlation which becomes independent of thickening time. An explanation is offered to the correlation obtained.
Databáze: OpenAIRE