Application of friction welding in petroleum and chemical engineering

Autor: N. S. Fataliev, R. D. Dzhabarov, V. G. Abdullaev, V. I. Timofeev, Yu. A. Tkachev
Rok vydání: 1994
Předmět:
Zdroj: Chemical and Petroleum Engineering. 30:451-455
ISSN: 1573-8329
0009-2355
DOI: 10.1007/bf01148823
Popis: Welding, as a technological process, is widely practiced in modern engineering. Resistance or arc welding is most common, but these techniques are increasingly giving way to friction welding which has several advantages, namely higher labor productivity and better quality, possibility of joining diverse and poorly weldable metals and alloys, dispensing with high-grade welding materials and highly skilled welders, ecological cleanness of the process, etc. The major criterion of efficient application of friction welding is its use in large-scale manufacture of a specific equipment, whereupon the cost of the machine is recovered in a short period. That is why friction welding with creation and fabrication of specific machines was adopted by the petroleum machinery manufacture (manufacture of geological prospecting and drill pipes, pump rods of the welded design, and gate valves of high-pressure Christmas trees). By applying friction welding for the manufacture of geological prospecting and drill pipes in place of resistance butt welding, accidents during drilling due to failure of the welded joints were prevented totally. Application of friction welding for making pump rods of the welded design (with welded nipples and heads) made it possible to save costly high-strength and corrosion-resistance alloy steel to the extent of 90%. Use more » of friction welding in the manufacture of high-pressure gate valves with welded flanges simplifies the valve-making technology and improves the reliability of the welded joints, even at temperatures as low as -60{degrees}C. In particular, cast gate valve bodies with friction-welded side flanges were tested before their breakdown. The welded joints of the branch pipes, even though they were sharpened to reduce wall thickness, did not fail, which shows high reliability of the gate valve bodies of the welded design. « less
Databáze: OpenAIRE
Externí odkaz: