Mechanical Properties And Microstructure Evolution in Arc Stud Welding Joints of AISI 1020 with AISI 316L and AISI 304

Autor: Sami A. Nawi, Mohammed H. Abass, Muhaed Alali, Sabah Kh. Hussein, Adnan N. Abood
Rok vydání: 2021
Předmět:
Zdroj: Metallography, Microstructure, and Analysis. 10:321-333
ISSN: 2192-9270
2192-9262
DOI: 10.1007/s13632-021-00744-8
Popis: The mechanical properties and microstructures of dissimilar arc stud weldments of AISI 316L/AISI 1020 and AISI 304/AISI 1020 were investigated. Welding currents of 400, 600 and 800A and welding times of 0.2, 0.25, 0.3, 0.35, 0.4 and 0.45 second were employed. Maximum torque strength of 77N m was registered with 600A and 0.25 second for 316L/AISI 1020 joints with failure occurred away from the fusion zone (FZ) within the stud shank. However, for AISI 304/AISI 1020 joints, the maximum torque strength was 68N m recorded with 600A and 0.35 second and the failure occurred at FZ. For both dissimilar joints, the presence of chromium carbides and equiaxed grain structures is the direct cause for the augmentation of hardness at the FZ. The microstructure of FZ was completely resolidified of the austenite phase.
Databáze: OpenAIRE
Externí odkaz: