Charging magnet for the floating coil of LDX
| Autor: | B. C. Smith, E. Bondarchouk, V.E. Sytnikov, V. Kuchinsky, V.E. Korsunsky, A. Malkov, S. Egorov, A. Zhukovsky, V. Beljakov, O. Filatov, D. T. Garnier, J.H. Schultz, Alexey Radovinsky |
|---|---|
| Rok vydání: | 2001 |
| Předmět: |
Cryostat
Materials science Nuclear engineering Solenoid Superconducting magnet Superconducting magnetic energy storage Condensed Matter Physics Electronic Optical and Magnetic Materials Nuclear magnetic resonance Dipole magnet Electromagnetic coil Magnet Physics::Accelerator Physics Electrical and Electronic Engineering Levitated dipole |
| Zdroj: | IEEE Transactions on Appiled Superconductivity. 11:1873-1876 |
| ISSN: | 1051-8223 |
| DOI: | 10.1109/77.920214 |
| Popis: | The charging coil (C-coil) for the joint Columbia University/MIT Levitated Dipole Experiment (LDX) is under development jointly by MIT and the Efremov Institute. The NbTi superconducting C-coil serves to charge/discharge inductively the floating superconducting magnet to/from 2277 A when it is resting in the charging port at the bottom of the LDX vacuum vessel. The C-coil is designed for 3200 charge-discharge cycles. The solenoid magnet is installed in a low heat leak liquid helium cryostat with a warm bore of more than 1 m. The magnet protection system has an external dump resistor, which dissipates most of the 12 MJ stored during a quench. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|