Oxide films, pores and the fatigue lives of cast aluminum alloys
Autor: | P. N. Crepeau, Q. G. Wang, J. R. Griffiths, C. J. Davidson |
---|---|
Rok vydání: | 2006 |
Předmět: | |
Zdroj: | Metallurgical and Materials Transactions B. 37:887-895 |
ISSN: | 1543-1916 1073-5615 |
DOI: | 10.1007/bf02735010 |
Popis: | In the absence of gross defects such as cold shuts, the fatigue properties of castings are largely determined by the sizes of microstructural defects, particularly pores and oxide films. In contrast, the effects of grain size, second-phase particles, and nonmetallic inclusions are insignificant. The authors review the fatigue properties of castings made by gravity die casting, sand casting, lost-foam casting, squeeze casting, and semisolid casting, and compare A356/357 alloys with 319-type alloys. The application of fracture mechanics enables the properties to be rationalized in terms of the defects that are characteristic of each casting process, noting both the sizes and types of defect. The differences in the properties of castings are entirely attributed to their different defect populations. No single process is inherently superior. For defects of the same size (in terms of projected area normal to the loading direction), oxide films are less detrimental to fatigue life than pores. Areas of current controversy are highlighted and suggestions for further work are made. |
Databáze: | OpenAIRE |
Externí odkaz: |